Assembly of Pre-fix Tool
To customize Pre-fix tool, see the following descriptions.
Required devices¶
No. |
Parts name |
Category |
Required number |
Note |
---|---|---|---|---|
① |
Screwdriver |
1 |
||
② |
Pre-Fix Tool |
1 |
||
③ |
Column Adjustment Stick (for Pre-Fix tool) |
1 |
||
④ |
Acrylic Stick |
1 |
Procedures¶
Step 1¶
Remove 2 screws at the bottom of Pre-fix tool (②) with a Phillips screwdriver (①).
Step 2¶
Remove the resin panel at the bottom of Pre-fix tool (②).
Step 3¶
Install the column adjustment rod (for Pre-fix tool) (③) and the acrylic rod (④) on Pre-fix tool.
When they are not required, remove the column adjustment rod (for Pre-fix tool) (③) and the acrylic rod (④).
Step 4¶
Install the resin panel at the bottom of Pre-fix tool (②) and install 2 screws.