CARx calc. prss out of range [Error Code:5006 5007 5008 5070 5071 5072 5101 5105]
Cause¶
The column inlet pressure calculated from the inputted linear velocity, flow, split ratio and column flow is outside the set range.
Solution¶
- Set the linear velocity and column flow so that the column inlet pressure is within the AFC control range.
- Check the inputted column information (inner diameter, length, and film thickness).
- Check the initial column temperature setting.
TechnicalDocument_AFCnAPC-Control-Ranges-TotalFlow-n-InletPressure