AOCm can not start [Error Code:6004 6026]
Cause¶
Start is attempted under the following conditions:
- Door is open.
- Error is present.
- Power was turned on with the door open, and the [RESET] button is not pushed.
- The syringe replacement procedure has not been completed.
- The turret type and the GC sampler presence setting are not consistent.
Solution¶
Close the door, remove the cause, and press the [RESET] button.
If the error occurs again after taking the measures, turn off the main power of the instrument, stop gas supply, and contact your Shimadzu sales/service representative.